Enclosure files + firmware

firmware/include/Config.h

@@ -0,0 +1,35 @@
+#pragma once
+
+#include <Arduino.h>
+
+// --- Hardware ---
+#define OLED_WIDTH 128
+#define OLED_HEIGHT 64
+#define OLED_ADDR 0x3C
+
+#define LED_PIN 15
+#define NUM_LEDS 16
+#define LED_BRIGHTNESS 100
+
+#define ENCODER_A_PIN 27
+#define ENCODER_B_PIN 25
+#define BUTTON_PIN 26
+
+// --- LED Colors ---
+#define BLUE        0x0000FF
+#define AMBER       0xFFBF00
+#define RED         0xFF0000
+#define GREEN       0x00FF00
+#define YELLOW      0xFFFF00 
+#define MAGENTA     0xFF00FF 
+#define TEAL        0x008080  
+
+// --- Defaults ---
+#define DEFAULT_TIMER   25  // min - Default to 25 minutes if no value in NVS
+#define MIN_TIMER       5   // min - Minimum timer
+#define MAX_TIMER       240 // min - Maximum timer (4 hours)
+
+#define SPLASH_DURATION 2   // sec - 2 seconds splash state
+#define CHANGE_TIMEOUT  5   // sec - 5 seconds adjust timeout
+#define SLEEP_TIMOUT    5   // min - 5 minutes to transition to sleep
+#define PAUSE_TIMEOUT   10  // min - 10 minutes to cancel the timer if stayed paused